4091V3 Type 1

4091V3 | Type 1

Technical Specification

Overall dimensions ………………….. 2260 mm x 1010 mm
Mattress platform …………………….. 2000 mm x 810 mm
Hi – Low ………………………………………. 800 mm – 5 00 mm
Side rail height ………………………….. 435 mm
Back rest angle ………………………….. 0-85 °
Knee rest angle …………………………. 0-30 °
Trendelenburg & Reverse Trend …………….. ±11 °
Bed weight ………………………………… 152 kg
Safe working load …………………….. 250 kg
Casters ………………………………………… 150 mm
Power input max ………………………….. 250 VA
Main power system ……………………… 220V – 50 Hz, 24 V DC
Electrical current protection ………. Class I
Electrical shock protection …………. Type B
Operation mode …………………………… 10%, max.: 2 min./18 min
IP rating ………………………………………….. IP 66

Technical and Quality Assurance Standards
IEC 60601-1
IEC 60601-2-52
ISO 13485
ISO 14971

4091V3 | Type 1

Featuers

Nurse Control Panel

Easy to use Attendant Control Panel (ACP)
with illustrative schematics located at the
foot end of the bed provides all required
positions including CPR, Trendelenburg,
and Reverse Trend.

X-Ray Cassette Holder

Medical imaging has led to improvements
in the diagnosis and treatment of numerous medical conditions.
There are many types of medical imaging
procedures; however it is very uncomforting and difficult to relocate the patient for
imaging in the medical centers.
Considering patient and caregiver’s safety and comfort, 4091V3 has been equipped with x-ray capability for the chest which eliminates many of the risks associated with patient relocation and inaccurate results.

4091V3 | Type 1

Embedded Control Panel

User friendly embedded controlpanels are located on both safety sides of head section. Using the control
keyboards on internal and external parts of safety sides, the patient and caregiver are able to adjust the back rest, knee rest, and height of the bed.

Actuators

All positions of this bed are achieved by powerful, reliable, and low noise actuators. As the actuators have IP66 rating, they are protected against ingression of dust and water. This prominent feature of actuators makes it easy to clean and disinfect the bed in the medical centers on a regular basis.

CPR Mechanism

Two CPR quick release handles are located on either side of the bed for easy and fast access in the case of an emergency. The manual quick release mechanism operates
independently from the electrical CPR of the bed that makes it fully operational even if the power is cut off.

Mattress Platforms

The ABS mattress platforms of
this bed are produced by injection molding method. These platforms have some remarkable features such as smooth surfaces, high durability, and easy to remove for cleaning
and disinfection. Plus, the mattress platforms are compatible for steam cleaning.

Bumpers

Rotary bumpers that are located on four corners of the bed can prevent to a large extent the damages that may occur due to unwanted collision of the bed to the surroundings
during transportation.

Urine Bag Holder

Urine bag holder can be easely
installed on either side of the bed.

4091V3 | Type 1

Head & Foot Boards

The seamless blow molded bed ends of 4091V3 are lightweight, durable, and easy to clean. The bed ends are of high quality and compatible for steam cleaning. In order to have a better access to patient’s head in
emergency cases, the caregiver can easily remove the bed ends by grasping the
hand holds and lifting them up in one single step. Moreover, the bed ends have integrated steel fittings which make them extremely rigid; so the nursing staff can move the bed by holding and pushing them without worries.

Central Locking Centers

150 mm central locking casters run extremely smoothly; the quality that makes it significantly easy for the nursing staff to move the bed. In addition, the foot pedals allow effortless transition between the three modes of the central locking system:
safe central locking (down), easy maneuvering and positioning (middle), and fast directional movement (up) to provide a smooth and
controlled single person transportation of the
bed in medical centers.

Safty Sides

4091V3 has retractable overlapping safety
sides, with embedded control keyboards
for the patient and caregiver. Providing a
protective height and length, the sides
adhere to the highest standards of safety
to prevent patient fall and entrapment.

Uni-Frame

Unique design of 4091V3 chassis is a smart solution which eliminates many operations that are required to produce a hospital bed in an ordinary method.
The UniFrame removes the needs for cutting
and welding operations from the production process which boosts the stability and durability of the bed.

Neutralizing Springs

The application of springs in the mechanism neutralizes the imposed pressure on actuators and consequently enhances their performance and durability.

4091V3 | Type 1

Positions

| Back rest |

| Knee rest |

| Fowler |

| High |

| Low |

| Trendelenberg |

| Reverse Trendelenburg |

| Cardiac cahir |

4091V3 Type 1
4091V3 Type 1
4091V3 Type 2
4091V3 Type 2
4090EC1
4090EC1
35000EC1 Type 1
35000EC1 Type 1
35000EC1 Type 2
35000EC1 Type 2
35000MC1 Type 1
35000MC1 Type 1
35000MC1 Type 2
35000MC1 Type 2
35000E
35000E
25000EC1 Type 1
25000EC1 Type 1
25000EC1 Type 2
25000EC1 Type 2
25000MC1 Type 1
25000MC1 Type 1
25000MC1 Type 2
25000MC1 Type 2
22000MC1 Type 1
22000MC1 Type 1
22000MC1 Type 2
22000MC1 Type 2
1020V2 Type 1
1020V2 Type 1
1090V3 Type 1
1090V3 Type 1
8000T1 Type 2
8000T1 Type 2
8000T1 Type 3
8000T1 Type 3
8000T1 Type E
8000T1 Type E
8000T4
8000T4
Locker L200
Locker L200
Locker L300
Locker L300
Locker L400
Locker L400
Locker L500
Locker L500
N100
N100
N200
N200
T400
T400